Longevity ARCMATE 205 - Manual (Page 11)

160/205 MIG Welder/ARC Welder
Page 10 of 37
www.longevity-inc.com
Specifications and Ratings
Parameter Specifications and Ratings
Model 160 205
Input Voltage 1 phase 220v ; 50/60hz
Input Current 22amps 35amps
Rated Input Power 4.8 KVA 7.7 KVA
No Load Voltage 55~75V
Current Output Range (MIG) 30-160Amps 40-200Amps
Current Output Range (ARC) 30-135Amps 40-160Amps
Suitable Wire (Flux Cord or Solid Wire)
.025" (0.6 mm)
.030" (0.8 mm)
.035" (1.0 mm) .025" (0.6 mm)
.030" (0.8 mm)
.035" (1.0 mm)
Duty Cycle 30% - 160A, 60% -
115A, 100% - 90A
35% - 200A, 60% -
155A, 100% - 120A
Efficiency 0.85 0.85
Power Factor 0.8 0.8
Insulation Class F F
Protection Class Of Shell Fan Cooling Fan Cooling
MIG shielding gas information:
Use a blended Argon/CO2 gas for best results.
100% CO2 is only used for low value welds.
A 75/25 Argon/CO2 mix is the most versatile and most common mixture.
Other mixes are available such as 85/15 Argon/CO2 to further improve weld quality.
Do not use pure Argon on mild steel.
Do not attempt to weld without a shielding gas unless a flux cored wire is used.