Lenze SL - Manual (Page 47)

Lenze 13466147 EDBSM01 v19 EN 47
Commissioning 4
P55 0-10 VDC INPUT
Parameter P55 displays the level of the 0-10 VDC input signal at TB-5. A reading of 100% indicates
a 10 VDC input at TB-5.
P56 4-20 mA INPUT
Parameter P56 displays the level of the 4-20 mA input signal at TB-25. A reading of 20% indicates a
4 mA input at TB-25, and a reading of 100% indicates a 20 mA input at TB-25.
P57 TERMINAL STRIP STATUS
P57 indicates the status of several terminals using the vertical segments of the LED display. An
illuminated segment indicates that the particular terminal is closed to TB-11.
FACTORY
RESERVED
TB-1 TB-13A
TB-13B
TB-13E
(output)
TB-13E
(input)
P58 KEYPAD AND PROTECTION STATUS
P58 indicates the status of the buttons on the keypad, and the status of the protective circuitry
in the drive, using the horizontal segments of the LED. An illuminated segment indicates that the
corresponding button is pressed, or the protective circuit is active.
FCLIM
Mode
OUTPUT
FAULT
p
q
FCLIM is an abbreviation for Fast Current Limit.