Lenze E82ZAFLC010 - Manual (Page 39)

Electrical installation
Wiring
4
EDK82ZAFLC−010 DE/EN/FR 4.0
39
l
H1_E_INST−INS_Klembesch
DC−voltage supply
)
Note!
With external voltage supply, please always use a separate power supply unit
in every control cabinet.
DC voltage supply
Internal The internal voltage is available at terminal X3.3/20. It is used to supply the
controller inhibit (CINH), see
^ 41.
External External voltage supply is necessary
l for stations which are disconnected from the mains but their communication
with the master is to be maintained.
l for stations with activated bus terminating resistor which are to be
disconnected from the mains although the bus system is to remain active.