Lenze E94AYCDN - Manual (Page 41)

Commissioning
Possible settings via DIP switch
7
EDK94AYCDN DE/EN/FR/ES/IT 3.0
41
l
H1inbet−bevor
7 Commissioning
Possible settings via DIP switch
E94YCDN001D
Via the DIP switches on the front, the following can be set:
ƒ Station address using switches 1 ... 32 ("MAC ID" area)
ƒ Baud rate using switches 1 and 2 ("Baud" area)
Pos. Switch positions
Baud rate Node address (MAC ID)
2 1 kbps 32 16 8 4 2 1
S225 OFF OFF 125 The station address results from the sum of the
binary values of switches 1 ... 32.
l Example: Station address 44
W switches 32, 8, 4 = ON (32 + 8 + 4 = 44)
l Valid address range: 0 63
l The Lenze setting for all switches is OFF.
OFF ON 250
ON OFF 500
ON ON No function
)
Note!
Please observe the information about the setting of the DIP switches given in
the "Commissioning" and "Appendix" chapters of the E94AYCDN
communication manual (DeviceNet).