Lenze ERBPxxxRxxxx Brake resistor 200W-300W - Manual (Page 50)

6 Electrical installation
Important notes
EDKRBP082R DE/EN/FR/ES/IT 7.0
50
l
H1_E_INST−eInstall_EN
6 Electrical installation
Important notes
(
Stop!
Possible overheating of the brake resistor during operation
Inadequate heat dissipation during operation can cause the brake resistor to
overheat.
Possible consequences:
ƒ The brake resistor is destroyed.
ƒ The drive is not braked but coasts to a standstill.
Protective measures:
ƒ Always connect the thermal contact of the brake resistor.
ƒ Integrate the thermal contact into the overall equipment monitoring
apparatus in such a way that the supply of power to the standard device is
switched off if the brake resistor overheats (e.g. switch−off by means of
mains contactor control).