Lenze EPM Programmer EEPM1RA - Manual (Page 16)

14 ENGLISH
Operation
4.9 Edit the EPM
This menu item is only displayed when the EPM Programmer is configured for a Servo product.
With this function it is possible to edit PPP BAUDRATE, NETWORK ADDRESS, CAN NODE ID, and CAN BAUDRATE
for Model 94 Servo drives.
Press The display shows... Explanation
1.
MENU
EDIT EPM Press the key until the menu appears in the display.
2.
ENTER
EPM INFO
********(16384)>
This request is briefly shown in the display.
The EPM parameter version is displayed.
ENTER
CAN NODE ID Displays the parameters that can be edited
3. NETWORK ADDRESS Select the parameter file you want to Edit
(NETWORK ADDRESS is shown as an example)
4.
ENTER
NET ADDR 3 1 The cursor is blinking in the display on the right
NET ADDR 5 Change the parameter
ENTER
NETWORK ADDRESS Stores the new value onto the EPM
MENU
EDIT EPM Returns to the main menu.
Tip!
• The EPM can only be edited if the configuration of the EPM Programmer and the parameter version of the EPM
are identical. See section 4.13 for changing the configuration of the EPM Programmer.