Unpacking and setup, 1 unpacking, 2 site requirements – Leica Biosystems SM2000R User Manual
Page 11: Unpacking, Site requirements
11
•
Open the cardboard box.
•
Remove all foam material.
•
Take out all accessories and the instruction manual.
Do not carry the instrument holding it at movable parts!
•
To lift the instrument from the box, hold it at the lower part of the housing and
place it on a stable, vibration-free laboratory table.
6.2
Site requirements
The installation site must meet the following requirements:
-
Stable, plane surface
-
Room temperature always between +10 °C and +40 °C
-
Relative air humidity should not exceed 80 %.
6.
Unpacking and Setup
6.1
Unpacking
First check the shipment for external damages upon arrival. If it is evident
that the shipment was damaged during transport, please make a claim to the
carrier immediately.
See also other documents in the category Leica Biosystems Equipment:
- SM2010 R (46 pages)
- CM305 S (66 pages)
- CE Knife holder (14 pages)
- CM1950 (78 pages)
- VT1200/VT1200 S (62 pages)
- VT1000 S (42 pages)
- HI1220 (18 pages)
- HI1210 (18 pages)
- CM1850 UV (56 pages)
- CM1850 UV (54 pages)
- CM1510-S (56 pages)
- CM3600 XP (114 pages)
- CM1100 (36 pages)
- CM1860/CM1860 UV (98 pages)
- Premium blade holder (14 pages)
- CM1520 (92 pages)
- VT1000 A (49 pages)
- VT1000 P (48 pages)
- SP2600 (51 pages)
- SM2500 (76 pages)
- SM2400 (8 pages)
- EG1160 (32 pages)
- EG1150 C (20 pages)
- EG1150 H (42 pages)
- EG1130 (2 pages)
- EG1120 (2 pages)
- EG F (18 pages)
- ASP300 (70 pages)
- PELORIS_PELORIS II (160 pages)
- TP1020 (102 pages)
- ASP200 S (88 pages)
- ASP300 S (88 pages)
- ASP6025 (178 pages)
- LN22 (44 pages)
- RM CoolClamp (20 pages)
- RM2265 (88 pages)
- RM2255 (82 pages)
- RM2245 (78 pages)
- RM2235 (78 pages)
- RM2125 RTS (60 pages)
- SP9000 (30 pages)
- SP1600 (10 pages)
- ST4040 (50 pages)
- ST5020 (88 pages)