Leica Biosystems CM1850 UV User Manual
Leica cm1850 uv, Cryostat
Table of contents
Document Outline
- 1.1 Symbols used in this manual and their meaning
- 1.2 Qualification of personnel
- 1.3 Designated use
- 1.4 Instrument type:
- 2. Safety
- 2.1 Safety features
- 2.1.1 Locking the handwheel
- 2.1.2 Knife guard
- 2.2 General information on instrument design and safe handling
- 2.3 Operating conditions
- 2.4 Operating the instrument
- 2.5 Cleaning and disinfection
- 2.6 Removal of the microtome
- 2.7 Maintenance
- 3. Technical data
- 4. Unpacking and installation
- 4.1 Site requirements
- 4.2 Transport to the desired location
- 4.3 Standard delivery
- 4.4 Handwheel assembly
- 5. Setup
- 5.1 Connection to mains power
- 5.2 Prior to operation
- 5.3 Leica CM1850UV - Overview
- 5.4 Mains switch and automatic mains fuse
- 5.5 Turning the instrument on
- 6. Control panel operation
- 6.1 Control panel 1
- 6.2 Programming the desired values
- 6.2.1 Setting the time
- 6.2.2 Setting the automatic defrost time (cryochamber)
- 6.2.3 Selecting the cryochamber temperature
- 6.2.4 Activation of the Peltier element (option)
- 6.2.5 Manual defrosting of the quick freeze shelf
- 6.2.6 Manual defrosting of the cryochamber
- 6.3 Display lock
- 6.4 Control panel 2 - Electric coarse feed
- 7. Daily use of the instrument
- 7.1 Specimen freezing
- 7.1.1 Quick freeze shelf
- 7.1.2 Stationary heat extractor
- 7.2 Specimen discs
- 7.2.1 Inserting the specimen discs in the specimen head
- 7.2.2 Specimen orientation
- 7.3 Sectioning
- 7.3.1 Trimming the specimen
- 7.3.2 Section thickness setting 28
- 7.4 Temperature selection chart (in minus °C)
- 7.5 Defrosting
- 7.5.1 Automatic defrosting of the cryochamber
- 7.5.2 Manual defrosting of the cryochamber
- 7.5.3 Manual defrosting of the quick freeze shelf
- 7.6 Terminating work
- 7.6.1 Terminating daily work
- 7.6.2 Shutdown for a longer period
- 8. Troubleshooting
- 8.1 Error messages in the display
- 8.2 Temperature control button
- 8.3 Possible causes and remedies
- 9. Cleaning, disinfection, maintenance
- 9.1 Cleaning
- 9.2 Spray disinfection with Leica Cryofect
- 9.3 Maintenance
- 9.3.1 General maintenance
- 9.3.2 Removal of the microtome
- 9.3.3 Removal of the microtome cover
- 9.3.4 Reinstallation of the microtome
- 9.3.6 Replacement of UVC lamp
- 9.3.5 Replacement of the fuses
- 9.3.7 Replacement of the lamp
- 10. Ordering information, optional accessories
- 10.1 Ordering information
- 10.2 Optional accessories
- 10.2.1 Mobile heat extractor
- 10.2.2 Thermal block
- 11. Warranty and service
- 12. Decontamination Certificate (master)
- 13. Information for the People´s Republik of China