B&B Electronics 3PXCC1A - Manual (Page 6)

Documentation No.3PXCC1x-2x-3903 7
B&B Electronics Mfg Co – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics Ltd – Westlink Comm. Pk – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445
Left-click on Input/Output (I/O).
Scroll through the list, checking 03F8H, 02F8H, 03E8H, 02E8H. If
one of these is available, use it. If not, check alternates.
Find a free address in the list. Most desktop PC’s have a COM1 and
possibly a COM2 already on their system which will be seen in the
list. You might have to start at COM3 or COM4 to begin addressing
the ISA card. If these addresses are used you may have to resort to
the Frequently Unused Port Addresses (found in Chapter 4, Table 3)
of this manual. Write these open addresses and IRQ’s down for later
reference.
8 Documentation No.3PXCC1x-2x-3903
B&B Electronics Mfg Co – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics Ltd – Westlink Comm. Pk – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445
Adding Serial Port(s) in Windows 95/98
Go to Start Menu / Settings / Control Panel.
Run the Windows Add New Hardware utility found in the control
panel. Click Next.