B&B Electronics 3PXCC1A - Manual (Page 10)

Documentation No.3PXCC1x-2x-3903 15
B&B Electronics Mfg Co – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics Ltd – Westlink Comm. Pk – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445
Checking Windows NT Diagnostics for Available
Address/IRQ’s (Windows NT 4.0)
Click on Start / Programs / Administrative Tools / Windows NT
Diagnostics.
Left-click on Resources.
Find a free IRQ in the following list. Any number that is seen on
the left hand side of this screen is an IRQ that is currently being
used. The object is to find a number of IRQ(s) not listed and set
your port(s) using those IRQ’s.
16 Documentation No.3PXCC1x-2x-3903
B&B Electronics Mfg Co – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics Ltd – Westlink Comm. Pk – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445
Left-click on I/O Port in Resources. Tab to view currently used
addresses.
Scroll through the list, checking 03F8H, 02F8H, 03E8H, 02E8H. If
one of these is available, use it. If not, check alternates.
Find a free address in the list. Most desktop PC’s have a COM1
and possibly a COM2 already on their system, which will be seen in
the list. You may have to start at COM3 or COM4 to start your
addressing of the ISA card you have. If these addresses are used
you may have to resort to the Frequently Unused Port Addresses
(found in Chapter 4, Table 3) of this manual. Write these open
addresses and IRQ’s down for later reference.