Labnet Prism Air-Cooled Microcentrifuge (C2500) - Manual (Page 6)

1.3 Technical data
Dimensions
Width
9.45 inches
Depth 13.8 inches
Height 7.48 inches
Maximum speed 15,000rpm
Maximum RCF 21,200 x g
Maximum volume 24 x 2.2ml
Admissible sample density 1.2kg/dm 3
Electrical/fuse rating 120V~, 50-60Hz, .A, 5 AT
230V~, 50-60Hz, 1. A, 2.5 AT
Operating temp./humidity 0ºC to 40ºC / ≤80%RH
1.4 Accessories supplied with centrifuge
Each unit is supplied with 1 instruction manual, 1 warranty card 1 power cord, a standard
angle rotor and a rotor removal tool.
1.5 Warranty
This centrifuge has been subjected to thorough testing and quality control. In the
unlikely event of a manufacturing fault, our one year warranty (from the date of delivery)
covers the centrifuge and the rotor. This warranty becomes invalid in the case of
incorrect operation, use of nonstandard spare parts or accessories and unauthorized
modification of the rotor or centrifuge.
Labnet reserves the right to make technical modifications. Please see the complete
limited warranty statement supplied separately.
2. Installation
2.1 Unpacking the centrifuge
Before unpacking the centrifuge, inspect the outside of the carton for any shipping
damage.
The centrifuge is delivered in a carton with protective foam cushioning. Remove the
centrifuge from the carton. Retain the carton and cushioning until it has been established
that the centrifuge is working properly.
Inspect the centrifuge for any visible signs of shipping damage. Shipping damage is the
responsibility of the transportation carrier. Any claims for damage must be filed within
48 hours with the carrier that delivered the centrifuge.
The accessories supplied with the centrifuge should be kept with the instruction manual
near the centrifuge’s place of installation.