Kifco T45x1320 400,000 - Present Operator Manual - Manual (Page 14)

- Start
the watering
Fig. 17 Fig. 17
0
5
10
20
15
25
50
100
150 200
250
300
350
bar
psi
0
5
10
20
15
25
50
100
150 200
250
300
350
bar
psi
Sp
a
in
in
m
c
g
ete
rs
W
n
ing
i d
spe
ed
n m
eter
/
ou
i
s h
r
De
p
t
f w
a er
h o
t
in
mm 0
5
10
20
15
25
50
100
150 200
250
300
350
bar
psi
- Engage
gearbox and
stop rod
Engage
gearbox
Engage
gearbox
Engage
Stop rod
Engage
Stop rod
- Push lever of gearbox clutch.
- Push stop rod on the right
f)
a)
b)
c)
d)
e)
Engage
4 - Engage the 2 wheels chain clutchs
Page 10
- Unwinding
summary:
1) Spool perpendicular to the wheels and parallel to the furrow.
2) Plant the stabilizer legs, and lower the trolley.
3) Disengage the 2 wheels chain clutchs .
4) Raise the anti-return pawl.
5) Block the turbine by-pass in the maximum open position. (Without ESC)
6) Attach the trolley to the tractor and unwind the first 60
meters aligned to the hose reel it. 5Km/h maximum speed without surges.
7) Stop when the white painted part appears on the spool. Allow at least one wrap of tube to remain.
8) Put down the anti-return pawl.
OPERATION OPERATION Winding and start up
5)
User instruction book St8
Anti-return pawl lower Anti-return pawl lower
- 1) after unwinding the hose, put down
the anti-return pawl.
- Anti-return
pawl
- 3) it is necessary to connect the hosereel now to the pump group.
- Pump group
- 4) Turn on the pump (see the pump group manual).
- After all the air is purged from the system and the sprinkler is operating smoothly,
you can start the drive system.
IMPORTANT:
For turbine drives, allow the water to go through the system for several minutes
to carry out any trash or debris that may have been in the mainline pipe. After
the system is thoroughly flushed, start the drive system. To guarantee the reel will function
for an entry pressure not exceeding 10 bars, take into account the pressure loss of the hose, turbine and layer
change. (fig.17)
IMPORTANT:
Engage Engage
It’s imperative then the clutch are engage or disengage on 2 side
in even time to maintain the synchronization of mechanism
- Wheels chain
clutchs
Engage