Kifco E23 360,000 - Present: Operator Manual - Manual (Page 33)

T23_AA_Operator Manual_2014 Revised 08/2014
Maintenance & Adjustments
Taky Maintenance
Battery Replacement
Only use 1.5v alkaline batteries (AA). Rechargea-
ble batteries are not compatible with this sys-
tem.
 Remove the 4 screws from the cover.
 Replace the batteries.
 Press the reset button to restart the circuit.
When replacing the battery the Taky will not
have to be completely reprogrammed; however,
you will need to reset the length.
Electrical Connections
 Terminals VB+ and VB– are not used (Figure 1)
 Terminals S1+ and S1– must be connect-
ed to the pinion sensor (Polarity Same)
(Figure 2)
 Terminals S2+ and S2– must be connect-
ed to gearbox tach shaft sensor (Polarity
Same)
30