Katun Canon C-122 Drum Unit Cartridges - Manual (Page 2)

Rebuilding Instructions
for Canon 6012/6212/6312/6412/6612/7130/C-122 Drum Unit Cartridge
©2005 Katun Corporation PN 22713
(A) Handle/Cover
(B) Toner Sump Cover
(C) Flange
(D) BCR Assembly Securing Clip
(E) Contact Plate
(F)
Actuator
Rebuilding Kit
(PN 22522) Contents:
Optional Components:
(1) OPC Drum
(1) E-Prom Copy Counter Chip (available separately PN 15022523)
(1) Drum Cleaning Blade
(1) Toner Recovery Seal
(1) Copy Counter Label
(1) Primary/IP Label
(1) Wipe
Recommended Tools and Materials:
• Phillips screwdriver, #2 (PN 11015497) • Office equipment service vacuum 115 VAC (PN 11737730)
• Kynar-Dusting Pouch (PN 11707200) • Office equipment service vacuum 220 VAC (PN 11737710)
• Lint-free cloths (PN 11011532) • 99% pure isopropyl alcohol (PN 11703966)
• Flat Tip Tweaker (PN 11009843) • 15 cm Metric Ruler (PN 11009188)
• Lubriplate‚ High Temperature Grease (PN 11708023)
(NOTE: All recommended tools and materials are available from Katun.)
Disassembly
1
1. Remove handle/cover (A).
2. Remove toner sump cover (B) and vacuum out toner.
2
A
B
(G) Bias Charge Roller (BCR) Assembly
(H) Bias Charge Roller (BCR)
( I )
Drum Cleaning Blade (DCB)
(J) Toner Recovery Seal
(K) Toner Recovery Paddle Bushing