Kargo Master Transit Connect/Nv200 Wire Partition (40668) User Manual

Page 3

Text mode
Original mode

Step 1-Both Models
Bolt “Bottom Panel” to “Middle Panel” and “Upper Panel” using ¼”x3/4” Button Head bolts with flat washers and nyloc nuts as
shown, DO NOT FULLY TIGHTEN at this point.

Step 2-2014 and Newer Transit Connect-Skip This Step for NV 200
Bolt “Bottom Mount Plate” to the “Partition Assy.” Using 5/16”x3/4” Carriage bolts with flat washers and nyloc nuts from the
bottom as shown so the head of the bolt is against the floor mat.