Kargo Master Drop Down Ladder Rack (40853) - Manual (Page 16)

R
15
Ladder Stop
Item -009
5/16 Flat
Washer
Right End Plate
Item-008
Pan Stiffener
Item-030
5/16 Lock
Washer
5/16x3/4
Bolt
Ladder Stop
Item -009
Step 13
Attach each End Plate Item-008 and the Pan Stiffener Item-030 as shown below using
2 x 5/16" x 3/4" bolts, lock washers and flat washers. There is a LEFT and RIGHT End
Plate. Be sure to locate properly. The ladder retainer pins go on the outboard side of
the Plates. Tighten only snug as the End Plates must be adjusted to the ladder by the
end-user in the field. There is a label on the rack and separate instruction sheet
attached to the rack in a plastic pouch.
Step 14
Attach Ladder Stop Item -009 to Front Bow (or maybe Rear Bow if you are left handed)
using 3/8 x 1 carriage bolt. See diagram below.