Kargo Master Drop Down Ladder Rack (40853) - Manual (Page 15)

T
14
Ladder Hold Down
(Item-007)
3/8 x 5/8
Bolt
3/8 Lock
Washer
3/8 Flat
Washer
J Clip
Step 12
Attach each Ladder Hold Down Assembly Item-007 to the Hinge Assembly using 1 x
3/8" x 5/8" hex bolt, lock washer and flat washer as shown below. Tighten only snug as
the Hold Down and the J clip must be adjusted to the ladder by the end-user in the
field. There is a label on the rack and separate instruction sheet attached to the rack in
a plastic pouch.