Kargo Master Pro III Steel Ladder Rack – With A Camper Shell (80030) - Manual (Page 5)

E
N
K
STEP 4
Pro 3-ks _1.1-’06
#1 = Cover and seal swedge joints with
silicone sealant and insert the CENTER
CROSS BAR into the SIDE RAIL CUPS
and attach with bolts E, washers K and
lock nuts N.
#1 = Insert PLASTIC CAPS onto the rear
crossbar uprights, (the tall side of the tube).
Slide the REAR CROSS BAR into the REAR
LEG POSTS at the top, as shown.
STEP 6
#1 = Cover and seal swedge joints with
silicone sealant and slide FRONT CROSS
BAR onto side rails and bolt together with
bolts B, rubber washer R, and jam nut L.
SIL
IC
ON
E
STEP 5
B
R
L
SILIC
ON
E