New Buck Corporation 21 - Manual (Page 10)

STOVE DOOR
DOOR
HINGE
STEP
BOLT
BOLT
SHOULDER
THREADED
HOLE
STOVE DOOR
DOOR
HINGE
STEP
BOLT
STOVE BOTTOM
BOLT
SHOULDER
Figure 4-Attaching Lower Stove Door Panel
DOOR
DOOR CLAW
BOLT STOP
ADJUSTING NUT
FIGURE 5 - CATCH BOLT AND DOOR CLAW ORIENTATION
CATCH BOLT
DOOR CLAW
12. After returning the heater (stove) to its upright position, place the heater in the location de-
sired. NOTE: Check section in this Operations/Installation Manual for Clearances to Com-
bustibles.
CHIMNEY
Ceiling Exits:
This heater is designed for connection to:
(1) Simpson Duravent (4) Metal Fab
(2) Security (5) Airjet
(3) Selkirk Metal Bestos (6) Jakes Evans
listed at 2100 deg. pipe and parts. Follow pipe manufacturer’s instructions carefully.
This room heater must be converted to (1) a chimney complying with the requirements for
Type HT chimneys in the standard for chimneys, Factory-Built, Residential, Type and Building
Heating Appliance, UL 103, or (2) a code approved masonry chimney with flue liner.
8