JULABO FK31-SL Calibration Baths - Manual (Page 23)

SL
23
6.2.1. Switching on the cooling machine
 Switch on the cooling machine using the switch (1b) .

Control of the cooling machine:
With the mains switch (1b) turned on, the circulator automatically
switches the cooling machine off and on.
To save energy, turn off the cooling machine with the mains switch (1b)
whenever cooling is not required.
6.3. Start - Stop

Start:
 Press
key.
The actual bath temperature is displayed on the VFD COMFORT-
DISPLAY. The circulating pump starts with a slight delay.
Stop:
 Press
key.
or
Keep key pressed.
The VFD COMFORT-DISPLAY indicates the message "OFF".
6.4. Adjusting the temperature chamber
Adjusting the temperature chamber after set
up:
 If bath fluid overflow in the temperature
chamber is not equal in every direction, an
adjustment can be made with the 3 screws
that are accessible from above.
Required tool: SW3 hexagonal socket wrench
with ball-shaped head