Johnson Systems DE90-3000 Series Retrofit Control System - Manual (Page 17)

www.johnsonsystems.com 17
EEPROM
MEMORY
MODULE
EEPROM
BACKUP &
FIRMWARE
UPDATE
EDGE1
R1
R2
D12
U47
R115 R114 R113 R112 R111
U40 U41 U42 U43 U44
D24 R110 R109 D23 D22 R108 R107 D21 D20 R106 TP3
F1 F2 F3 F4
BR2 BR1
D9 D10 D11
VR2 C38
C39 D7 D8 T5
U26
U25
U24
U23
C40
R60
U20
R58
R59
C41
U21
R61
RLY2
D15
D16
Q4 Q3
RLY1
D13
D14
Q1 Q2 C42 U22 C43
U46
C75
R122 R123
C76
R124 R125
C77
R87 R86 R85 R84
C53
Q7
C54
C33 C34
U17 R52 R53
R128
R129 Q11 Q10 Q9 Q8
R54
U13 U12 U11 T3
D2
D3
D1
C1
C2
C3
VR1
C4 R5 R4
R3
C5
U1
R45
R44
R43
R46 R47 R48 R49 R50 R51
C32
C31
U10 U9
C30
R42
D6
C24
C25
U8
C26 C27 C28 C29
R41 R40 R39 R38 R37 R36 R35
R34
R33
R32 R31 R30
TP1
R7
R6 R17 R18 R19
R20
R21
R22 R25 R24 R23
C18 C17
U5 U6
C21
R29
D5
C16
C15
U16
C37 R57 R55 C35
U14
C14
C13
U4 U3
C12
R16
D4
C6
C7
U2
C8 C9 C10 C11
R15 R14 R13 R12 R11 R10 R9
R8
R28 R27 R26
C19 C20
U7
C22
C23
U15
C36 R56
C88
VR5 C87 R145 R144 R143 R142 U19 C86 C85 R141 R140 R139 R138 R137 R136 R135 R134 R133 R132 R131 R130 D26 U18 C84 C83
TPC
TPB
TPA
C68
U51
R89 R88
CALIBRATE
D27
D28
L1
D18
VR3
D17
PORT1
C62
U28
C61
C79
U50 U49
C78
R127 R126
U48
R120 R121
C67 C65
C64 C66
VR4 C47
C48
C49
D25 U45
R70 R71 C52
R72
R73
R146
C51 C50
R62
R63
R64
R65
C44
U27 C45
C46 R116
R117
R118
R119
Q6
Q5
D19 C82
U39
R66 R67
C80
U37
U38
C81
U36
C69
C70
U35
R68 R69
X1
TP4
C63
U29
C58
U32
U33
C59
U30
U31
C60
U34
C56
C55
U52
U53
C57
R78
R83
R82
R81
R80
R79 R74
R75
R76
R77
C89
F5 R105 R104 R103 R102 R101 R100 R99 R98 C74 R97 R96 C73 R95 R94 C72 R93 R92 C71 R91 R90
EDGE2
1 BUMP REM DC/FAN
PWM
ANA I/O DMX LCD LED SWITCH
1
TP2
Mounting Screws
EEPROM
Memory Module
MADD-24
(Multiple Application Dimmer Driver)
The MADD-24 is the central electronic control system (aka brain) for the
DE90-3000 Series retrofit control system. The MADD-24 is mounted on the
DE90-3000 backplane and can easily be removed by unscrewing two #4-40
mounting screws (use a small sized #1 Philips screwdriver) - located on the
top corners - and carefully pulling it upwards from the card edge connectors
using both hands. When re-installing a MADD-24 be ensure it is fully seated
into the card edge connectors and the two mounting screws are secured.
Located on the MADD-24 is a removable EEPROM memory module. The
EEPROM memory module slides into the PORT1 connector located on the
upper center of the board. The EEPROM memory module is used to backup
important configuration settings and may be removed for safe storage. The
EEPROM memory module can also be used for firmware updates. Refer to
menu items “EEPROM”, “FW-LOAD”, “RESTORE” and “BACKUP” on page
34 and 35 for further details.