INFICON Porter CDG020D 10 ... 1000 Torr / mbar - Manual (Page 3)

tina80e1 (2012-06) 3
Validity
This document applies to products of the CDG020D series.
Part numbers of standard products are indicated below. OEM
products have other part numbers and different parameter
settings (e.g. customized measurement range) as defined in the
corresponding ordering information.
5  Torr
(x 133 Pa; x 1.3 mbar)
6  mbar (x 100 Pa)
1  DN 16 ISO-KF
C  4VCR male
D  4 VCR female
E  8VCR female
0  FCC
1  D-Sub, 9-pin
A  Binder M12, 8-pin
3CAx-xxx-0x00
9  10
A  20
B  50
C  100
D  200
E  500
F  1000 (Torr only)
G  1100 (mbar only)
Flange
Unit
Measurement range
(F.S.)
3  1%
4  0.5%
Accuracy
Receptacle
The part number (PN) can be taken from the product nameplate.
If not indicated otherwise in the legends, the illustrations in this
document correspond to gauges with D-Sub receptacle and the
DN 16 ISO-KF vacuum connection. They apply to other gauges
by analogy.
We reserve the right to make technical changes without prior
notice.
All dimensions in mm.