Connecting the power supply – Heidolph EKT Hei-Con G User Manual
Page 22
22
E
PIN configuration of the 5-pole plug
2.5
Connecting the power supply
Danger
Make sure that the switching function is functioning safely when using
the EKT Hei-Con with devices other than the magnetic stirrer (MR)
Hei-Tec, Hei-Tec [ ].
The instrument requires a direct voltage potential of 8-15 V.
Magnetic stirrers MR Hei-Standard, Hei-Tec, Hei-Tec [ ], MR 3001K, MR 3002 etc.
These units supply the EKT Hei-Con with current. You have thus already connected the
power supply as described u
nder section “Electrical connection”.
Connect the magnetic stirrer or heating unit to the power supply.
The EKT Hei-Con has no switch. It is switched ON and OFF using the ON/OFF switch for
the magnetic stirrer. When using a plug power supply unit, disconnect it from the mains.