General Machine Products 89000 Cable Blowing Machine(Current) - Manual (Page 60)

Page 60 of 64 General Machine Products Co., Inc.
Appendix 7 TORNADO W/MANIFOLD LESS POWER PACK
The modified Tornado Cable Blowing Machine is designed to be used with an alternative
hydraulic power source in lieu of the standard Tornado Power Pack.
The unit is equipped with an external flow and pressure control manifold, which effectively
regulates the hydraulic power source as high as 12 gpm (45 l/m) and 3000 psi (207 bar) to
the required 4 gpm (15 l/m) at 1700 psi (117 bar) .
The manifold is fitted with 3/8" hydraulic quick release couplings. The power source must be
connected to manifold's inlet and outlet with two detachable hoses via the quick release cou-
pling. (Fig1)
Inlet Parker
P/N FF-371-8FP
Outlet Parker
P/N FF-372-8FP
Fig 1
GMP P/N 89007
Important: The Tornado Emergency Stop Accessory Kit (GMP P/N 29003), is required
with an alternative power source in order to be connected with Tornado’s emergency stop
circuit.
Note: The cartridges are factory set. Do not tamper nor adjust.
!