F greenhouse vent assembly, Not applicable to the 4x6 greenhouse) – Gardman Alum Greenhouse User Manual
Page 11
Step
Bolt the vent side bars
loosely to the vent top bar
as shown.
Step
Fit nuts and bolts to the
bottom ends of the vent
sides but do not tighten.
Slide the glazing sheet into
place.
Add the vent bottom bar as
shown. Check that the vent
is square and tighten all
nuts.
Slide completed vent along
the ridge bar until in
position.
Bolt the vent mounting bar
onto the roof bars using the
bolts previously inserted
(section D, step 5).
Adjust to butt up to the
vent and tighten.
Screw vent stay to vent
bottom bar using the pre-
drilled holes.
Screw the vent stay catches
to the vent mounting bar
using the pre-drilled holes.
F Greenhouse Vent Assembly
(Not applicable to the 4x6 Greenhouse)
F2
F3
F4
F4
Pictures viewed from inside the Greenhouse except where stated
Notes:
• The assembly is slightly different for glass and
•
polycarbonate glazing.
• Glazing sheets are from separate glazing packs.
Glass
D1
F1
D3
F3
F10
F12
1
2
1
2
1
2
Profile
Code
4x6
6x6
8x6
F1
F2
F3
F4
0
0
0
0
1
1
1
2
1
1
1
2
F10
0
1
1
F12
0
2
2
66
0
6
6
Poly
Outside view
M610
M6-1
Used for all sections so quantity not
listed in this or other parts lists.
Outside view
↔