Gardman Easy Obelisk - Manual

Easy Obelisk
Assembly Instructions
07701
Components Supplied Tools Required (not supplied)
Phillips cross-head screwdriver
Mallet
Tape Measure
Before You Start
• Layout all of the component parts and
make sure you have all of the parts listed.
• When you are ready to start, make sure
that you have the right tools to hand,
plenty of space and a clean dry area for
assembly. Always try to assemble the
product as close as possible to the
intended location.
• Remove all plastic bags and dispose of
safely.
• Retain the instructions for future use.
Caution
This pack contains small items which should
be kept away from children.
Ref Description Illustration Qty
A Top curved 3
tubes
B Central leg 3
tubes
C Lower leg 3
tubes
D Rings 3
E Finial 1
F Assembly 15
screws
G Finial retaining 1
screw
Consumer Helpline
If you have any problems or queries with
this product then please contact our
helpline number: 01406 372227,
or write to: Gardman Ltd. High Street,
Moulton, Spalding, Lincs, PE12 6QD.
Fax: +44 (0) 1406 372233.