Gardman Wire compost bin - Manual

Assembly Instructions
Helpline Number
If you have any problems or queries with this product please call our helpline on
+44 (0)1406 372227 between the hours of 9am to 5.30pm Monday to Friday.
Gardman Limited, High Street, Moulton, Spalding, Lincolnshire PE12 6QD
08661
Wire compost bin
Note: A liner is recommended as this will speed the composting progress. This can
be done with a proprietary liner or simply lined with polythene, u.v. stabilised weed
control fabric etc.
No Tools Required
Before You Start
Please check the pack contents before attempting to construct
this 'Wire compost bin'.
Assembly
1. Ensure that the ground spikes are at the bottom,
the joining rings are on the inside of the side
sections and the door catches are on the outside.
2. Join the four side sections by lining up the hooks
and rings and push home firmly.
3. Add the lid by inserting the two top spigots in the
rings; bowing the lid slightly will ease the assembly.
4. Close the lid and ensure that all of the catches are in
place before positioning the bin. This will ensure the
bin is square and the lid operates effectively.
5. Once positioned, push the ground spikes firmly into the
ground to stabilise the structure but avoid impeding the
access door.
6. The access door can be used to remove well rotted
compost without moving the bin.
Contents:
Side panels x 3
Side panel with door x 1
Lid x 1