Gardman Lean-to Greenhouse - Manual (Page 6)

A Greenhouse Side
A3
A2
A1
G1
Introduction
Lay parts on the ground, as pictured at the
top of this page.
Assemble loosely with the nuts to the
inside of the structure.
Step
Insert bolt into the
channel in the
upright (A3).
Bolt glazing uprights
to the outside of the
bottom bar.
Step
Bolt diagonal braces
to inside of bottom
bar.
Note: the flat side of
the bottom bar faces
inwards.
Step
Before bolting the
glazing uprights to
the outside of the
top gutter bar, insert
bolts into the
channels for fixing
the diagonal braces.
Step
Use the inserted
bolts (see 3) to
secure the diagonal
braces to the
uprights. Do not
tighten yet.
Step
Bolt the diagonal
brace to the inside of
the top gutter bar.
Repeat for the other
side of the
Greenhouse.
A1
A3
A1
G1
A2
A3
A3
G1
A2
G1
Pictures viewed from inside the Greenhouse except where stated
1
2
3
4
5
Profile Code Qty
A1-6 1
A2-6 1
A3 2
G1 2
M610
Used for all sections so
quantity not listed in this
or other parts lists.
5 5 3 3
4 4
1 1
2
08835.rev6 11/4/06 3:26 pm Page 6