Gardman Lean-to Greenhouse - Manual (Page 10)

Step
Push the plastic door base
sliders into the door bottom
bar as shown.
Screw through the uprights into
the bottom bar and the slider.
Step
Screw through the uprights into
the door middle bars and top
bar.
Fix the door running wheels
to the runner housing as
shown and bolt the housing
to the door top rail.
Insert the door seal into the
door uprights and trim to
length. Lubricate with
vaseline or washing up
liquid to ease fitting.
Note: Stretching can occur
whilst fitting. Allow a few
minutes to shrink back
before trimming.
Ease the door into position,
gently pushing the base
slider onto the bottom
track.
Slide the running wheels
onto the top track.
Adjust the position of the
running wheels in the wheel
housing for smooth running
of the door.
E Greenhouse Door Assembly
E2
E4
E4
E5
E3
Door
Assembly
Parts
Outside view
E1
E11
E3
E1
E4
E1
E2
E5
Pictures viewed from inside the Greenhouse except where stated
E1 E1
E2
E5
2 2
3 3
2 2
1 1
1
& 2 3
619
619W
Profile Code Qty
E1 2
E2 1
E3 1
E4 2
E5 2
619 14
619W 2
E12 2
M416 2
M4-1 2
M4-2 2
E10 2
E11 2
M610
Used for all sections so
quantity not listed in this
or other parts lists.
08835.rev6 11/4/06 3:26 pm Page 10