Briggs & Stratton MOWER - Manual (Page 11)

I-TRIM ®
11
1.1—ENGINE SPECIFICATIONS
TYPE: 3 cylinder turbocharged Diesel
ENGINE MODEL: Briggs & Stratton
954 DT
HORSEPOWER: 34 hp
COOLING: Water cooled
1.2—TRANSMISSION
TRACTION DRIVE: Oilgear variable
Displacement
Hydrostatic pump
WHEEL DRIVE Char Lynn hydraulic motors
MOTORS: with disc-parking brakes
1.3—STEERING
Eaton Power
Steering Control Unit
1.4—MOWER SPECIFICATIONS
FUEL TANK: 10 Gallons (38 liters)
OIL TANK: 12 Gallons (45 liters) Approx.
TIRES: Front: 16 x 6.50 - 8 (28 psi max)
Rear: 23 x 10.50 x 12 (20 psi max)
FRAME: Welded steel construction
MOWING SPEED: 0 - 7 MPH (0 - 11.3 km)
CONTROLS: Foot operated traction pedal for forward
and reverse, hand operated throttle
conttrol, electric valve for cutting units,
and hand operated parking brake.
1—SPECIFICATIONS
BATTERY TYPE: Exide Model 60 Premium
Type 78-60
12 V side post
7 3/16 (18 cm) height
6 ¾ (17 cm) width
10 1/4 (26 cm) length
1.5—CUTTING UNIT SPECIFICATIONS
CUTTING UNIT: (3) - 26” (.66m) wide decks
BLADES: (2) Right hand 26” (.66 m) wide blades
(1) Left hand 26” (.66m) wide blade
DECK MOTORS:(2) CW Hydraulic motors (Right/Rear)
(1) CCW Hydraulic motor (Left)
Rotation direction as viewed from top of deck
WIDTH OF CUT: 70” (1.778m)
HEIGHT OF CUT: 1.5” to 4” adjustment (38.1mm to
101.62mm)
1.6—LUBRICANTS
ENGINE OIL: Refer to enclosed Engine Manual
HYDRAULIC OIL: ISO 68 hydraulic grade oil.
1.7—OTHER
ROPS: Roll over protective structure
meets SAE J 1194 standards