ETC Source Four XT HID Zoom Long Yoke - Manual (Page 2)

NOTE: If printing this template from a PDF, it is
important that you check the dimensions to ensure
the template is accurate.
2.5 inch
(64mm)
2.7 inch
(68mm)
2.5 inch
(64mm)
2.7 inch
(68mm)
2.24 inch (57mm)
5.2 inch
(132mm)
10.4 inch
(264mm)
0.53 inch (13mm)
diameter hole
0.40 inch x 0.90 inch
(10mm x 23mm)
curved slot
0.40 inch x 0.90 inch
(10mm x 23mm)
curved slot
Rear view
10.4 inch
(264mm)
7.5 inch
(191mm)
19.6 inch
(497mm)
11.1 inch
(282mm)
9.25 inch
(235mm)
Front view
Side view
30.86 inch
(784mm)
13.11 inch
(333mm)
15-30 25-50
11.1 inch
(282mm)
9.25 inch
(235mm)
Front view Side view
24.42 inch
(620mm)
13.11 inch
(333mm)
Rear view
10.4 inch
(264mm)
7.5 inch
(191mm)
13.0 inch
(330mm)
Fixture Dimensions
Mounting Template
Page 2 of 2
Optional Mounting Adapters
15.75 inch
(400mm)
14.75 inch
(375mm)
Long Yoke
The mounting bolt pattern is the same as
the standard yoke.
7.25 inch
(184mm)
4.1 inch
(104mm)
10.25 inch
(260mm)
4.25 inch
(108mm)
(inside)
Single Pole Mount
25.0 inch
(635mm)
5.0 inch
(127mm)
4.1 inch
(104mm)
4.25 inch
(108mm)
(inside)
Twin Fixture Pole Top Mount
10.8 inch
(274mm)
8.0 inch
(203mm)
13.0 inch
(330mm)
6.25 inch
(159mm)
3.2 inch
(81mm)
20.25 inch
(514mm)
Wall or Square Pole Mount
NOTE: For ground mounting, use the full-sized template
shown here or download the template at
www.etcconnect.com. Use application appropriate bolts,
nuts, and washers such as hot-dipped zinc or stainless
steel for wet locations.
Use only the center hole in the yoke if frequent aiming
adjustments are needed. Use all three holes when the
location is fixed. The curved holes allow small aiming
adjustments.