ETC Source Four XT HID Zoom Wall Mount - Manual (Page 2)

11.1 inch
(282mm)
9.25 inch
(235mm)
Front view Side view
30.86 inch
(784mm)
13.11 inch
(333mm)
Rear view
10.4 inch
(264mm)
7.5 inch
(191mm)
13.0 inch
(330mm)
Fixture Dimensions
Standard yoke shown.
15-30
25-50
11.1 inch
(282mm)
9.25 inch
(235mm)
Front view Side view
24.42 inch
(620mm)
13.11 inch
(333mm)
Rear view
10.4 inch
(264mm)
7.5 inch
(191mm)
13.0 inch
(330mm)
Page 2 of 2
3.2 inch
(81mm)
20.25 inch
(514mm)
10.8 inch
(274mm)
8.0 inch
(203mm)
13.0 inch
(330mm)
6.25 inch
(159mm)
Wall Mount Dimensions
0.5 inch
(13mm)
6.25 inch
(159mm)
9.8 inch
(249mm)
10.8 inch
(275mm)
4.0 inch
(102mm)
1.0 inch
(25mm)
To install the Wall Mount:
Step 1: Bolt the fixture to the Wall Mount with the provided two bolts through the holes in
the base of yoke.
Step 2: Route the power cable through the cable grip and pull the cable out the back of the
mount. Leave slack in the cable between the fixture and the cable grip to allow
aiming the fixture.
Step 3: Tighten the cable grip.
Step 4: Make the electrical connection to the supply cable inside the junction box in the
wall.
Step 5: Attach the Wall Mount and fixture assembly to the wall.
Step 6: Aim the fixture.
Step 7: Tighten the mounting bolts to secure the fixture to the Wall Mount.
To junction box