ETC Source Four XT HID Zoom Half Shield - Manual (Page 2)

Half Shield Without other Accessories
Half Shield with External Media Holder
NOTE: The Half Shield can be installed on top of the External Media Holder with one set
of screws. Reference Source Four XT HID Zoom External Media Holder Installation
Instructions.
Page 2 of 2
To install the Half Shield with the External Media Holder:
Step 1: Position the External Media Holder on the front ring of the fixture.
Step 2: Face the shallow side of the Half Shield toward the object you are trying light, with the tallest side of the shield
providing glare control away from the lighted object.
Step 3: Align the Half Shield and External Media Holder screw holes with the four mounting holes on the front ring of
the fixture.
Step 4: Secure the Half Shield and External Media Holder with the four hex screws.