Eschenbach Optik iQon Agilo - Manual (Page 20)

Page 20
PC CONTROLS
VGA BRIGHTNESS
SW VERSION
FACTORY DEFAULTS
EXIT MENU
Contrast: The contrast control increases the difference between
bright and dark areas, making bright areas brighter and dark areas
darker. The iQon retains independent settings for picture and reading
modes. Note that contrast is not available in semicolor mode.
Saturation: This controls the intensity of color displayed in picture
mode. Reducing the saturation to minimum will result in a
monochrome image. Note that contrast is only available in photo mode
when color kill is switched off.
Camera Search: Choosing this option will cause the unit to
search for video sources on the two camera inputs.
Factory Defaults: Selecting this menu item will restore all video
settings, modes, colors and button functions to their factory
settings. This option is provided in case you set the unit into a mode
that you cannot remember how to undo.
6.3 The PC Controls Menu
Refer to figure below. The items in the PC Controls menu are explained
below.
Brightness: This control affects the brightness of the PC input.
When selected, a brightness bar is displayed and the brightness
can be varied using the split left/right buttons. Note that this function is
also available when the iQon is in PC mode. Simply use the split
left/right keys to control the brightness slider bar.
SW VERSION: The internal firmware revision is displayed on the
top line. This information is for service use only.