Eschenbach Optik iQon Agilo - Manual (Page 2)

Page 2
Important Safety Information
Please read all of the following instructions before setting
up your iQon.
• To prevent fire or electric shock please ensure this unit is
kept away from all liquids. Do not use the unit in
excessively damp or wet areas and do not expose it to rain,
snow, etc.
• Before cleaning the unit, please ensure that it is unplugged.
Use a slightly damp cloth to clean the exterior. Do NOT
use solvents or aerosol cleaners.
• This unit should never be opened. Unauthorized servicing
will invalidate your warranty. If you encounter any problems
with this unit please contact your local dealer.
• Use only with the power adapter provided.
• The camera connector is NOT for use with a computer
network; it has a proprietary pin-out for Ash cameras.
Connection to a computer network could damage either the
network or the iQon unit.
• When uninstalling the Agilo arm from a clamped position
please use the following procedure:
o Disconnect the camera cable from the iQon main unit.
o Remove the Agilo arm from the clamp by gently pulling
the arm upwards away from the clamp.
o Remove the clamp from the table by turning the clamp
screw anticlockwise.