Eschenbach Optik iQon Agilo - Manual (Page 13)

Page 13
Camera Mode
When pressed this button switches the
iQon output to Camera output only.
Fn
+
Semi-Color
Mode
Semi-colors can be chosen when this
button is pressed with the Fn
button.
This allows the use of different ink and
paper colors.
PC Mode
When pressed this button switches the
iQon output to PC output only.
Fn
+
Line marker &
Shutters
Shutter mode or Line Marker mode can
be chosen when pressed with the Fn
button. Shutter mode dims out the top and
bottom sections of the screen while line
marker mode generates a level reading
guide line.
Split Mode
When pressed this button switches the
iQon output to split screen mode.
When in split screen mode already the
button will toggle the output view between
horizontal and vertical split mode.
Fn
+
Freeze Mode
Hold down the Fn button and press this
button to freeze the camera image.
Pressing both buttons again will unfreeze
the image.
Mode
The mode button switches between
picture mode (for viewing images and
pictures) and positive, negative or
semicolor modes. A single press will
switch to picture mode from the last used
mode or vice versa.
It is also used to exit a slider bar or control
menu.
Pressing and holding this button for 2
seconds will bring up the Configuration
Menu described in Section 6 below.
Table 1.0. Keypad Functions.