Eschenbach Optik Andromeda - Manual (Page 13)

Page 13
Rev E EN
VGA: Press to display external computer video.
Ext Camera: Press to display an external camera or other video
source.
Freeze: Press to freeze the display.
Disabled: Pressing the function button has no effect.
5C. The Focus Mode menu
You can choose from three different
methods to focus the Andromeda.
Push Focus: In this mode the camera
will re-focus itself only when the Focus
button is pressed. If the height of the material under the camera is
changed, it will be necessary to press the focus button again.
Autofocus: In this mode the camera constantly monitors the
image and re-focuses automatically if necessary. This is the
recommended mode to use for most applications.
Manual Focus: This mode is useful if you require an image that is
slightly out of focus or you are looking at an awkward object that
the camera will not focus on correctly. In this mode you must press
+
(Hold focus button down and press Zoom Up or Down) to set
your desired focus.
5D. Factory Defaults
Selecting this menu item will restore all video settings, modes,
colors and button functions to their factory settings. This option is
provided in case you set the unit into a mode that you cannot remember
how to undo. You will be prompted to press the middle function button
on the front panel to reset the unit;
pressing any other button will exit
without altering the current settings.
FOCUS MODE
PUSH FOCUS
AUTOFOCUS
MANUAL FOCUS
PRESS TO RESET