Brother P-touch RL-700S - Manual (Page 44)

Specifications
44
Specifications
Item Details
Display LED lamps (blue and red)
Print
Printing
Method
Thermal transfer lamination/thermal printing
Print Head 360 dpi, 384 dots
Resolution
TZ, SZ or AL tape: 360 dpi
HG tape, high resolution mode: 360 x 720 dpi (in feed direction)
Speed
TZ, SZ or AL tape: up to 20 mm/sec
HG tape, high-speed mode: up to 40 mm/sec
Maximum
Width
27.1 mm
Interface USB (Ver. 2.0, Full speed)
Power Supply 220-240 V AC, 50/60 Hz (with AC adapter)
Power
Consumption
Printing Approx. 30 W
Standby Approx. 2 W
Reading Approx. 2.5 W
Dimensions 135 mm (W) x 190 mm (D) x 130 mm (H)
Weight Approx. 1.5 kg
Cutter Full cut and half-cut
*1 *2
*1. Cutter life is approximately 30,000 cuts when using full cut, and 20,000 cuts when using half-
cut.
*2. Half-cut is used only with laminated tape.
RFID Module
Frequency
Band
13.56MHz
Supported
RFID
I-Code SLI *3 *4
*3. I-Code SLI is a trademark or registered trademark of NXP Semiconductors (formerly Philips
Semiconductors).
*4. I-Code SLI conforms to ISO/IEC 15693 and 18000-3 standards.
Operating Temperature/
Humidity
10°C - 35°C, 20% - 80% RH