Environmental Express HotBlock Pro User Manual
Page 17
HotBlock™:
Operation and Instruction Manual
Parts & Supplies
15
•
Environmental Express
www.environmentalexpress.com / 800.745.8218 / 843.576.1147
Use FilterMate™ for Field Filtrations
If your method requires filtration in the field prior to analysis, the FilterMate™ offers an easy and inexpensive alternative to cumber-
some pumps and devices commonly used for this procedure. With just two SC475 digestion cups and one SC0407 FilterMate™, you can
meet the requirements of field filtrations. Simply take your sample in one SC475 cup, filter with a SC0407 FilterMate™, pour the filtrate into
another cup and cap.
SC0510 — Holder for FilterMate™ Filtrations
This machined HDPE fixture adds stability when
performing FilterMate™ filtrations. Digestion cup is placed
into center hole of FilterMate™ Holder prior to beginning
filtration. The holder secures the digestion cup as the Filter-
Mate™ is depressed through the liquid sample.
SC801 — AirLiteTM HEPA-Filtered Enclosure
This bench-top enclosure for the HotBlock Pro™
provides HEPA-filtered air for cleaner, more uniform
digestions. The AirLite uses a quiet, 117 CFM internal PVC
coated fan that is easily accessible by the technician. The
cabinet of the AirLite is constructed from PET-G for
exceptional clarity. The door of the hood opens a full 180°
to allow unrestricted access to the chamber. The body of the
enclosure rests in a thermoformed Kydex® bottom that traps
spills and can easily be removed for cleaning. The AirLite is
designed to enhance the use of the HotBlock Pro™and can
reduce sample contamination during the digestion process.
The HEPA filter can be changed in minutes. The AirLite can
be used anywhere a clean environment is required. It can
be exhausted with standard 4” flexible duct to the outside or
into existing ductwork. Spare 117CFM fan included.
Specifications —
Size: 25.5” h X 32” w X 24” d
Door Opening Size: 32” W X 17” h
Materials: Acrylic walls and door, Kydex® top and
bottom plates
Fan: 117CFM, PVC Coated
Electrical: 120VAC, 1 amp, 3-Prong plug