ElmoMC SimplIQ Analog Servo Amplifiers-Ocarina Installation - Manual (Page 10)

Ocarina/Castanet Installation Guide
MAN-OCSIG (Ver. 1.4)
Chapter 3: Installation
3.1 Before You Begin
3.1.1 Site Requirements
You can guarantee the safe operation of the Ocarina and Castanet by ensuring that they are
installed in an appropriate environment.
Feature Value
Ambient operating temperature 0 °C – 50 °C (32 °F – 122 °F)
Maximum relative humidity 90% non-condensing
Operating area atmosphere No flammable gases or vapors permitted in area
Note: Models for extended environmental conditions are available.
The Ocarina and Castanet dissipate their heat by convection. The
maximum ambient operating temperature of 0 °C – 50 °C (32 °F – 122 °F)
must not be exceeded.
3.2 Unpacking the Amplifier
To unpack the Ocarina and Castanet:
Carefully remove the servo amplifier from the box and the Styrofoam.
1. Check the amplifier to ensure that there is no visible damage to the instrument. If
any damage has occurred, report immediately to the carrier that delivered your
amplifier.
2. To ensure that the Ocarina or Castanet you have unpacked is the appropriate type
for your requirements, find the part number sticker on the side of the product:
The P/N gives the type designation as
follows:
Maximum DC
Operating Voltage
Continuous Current
(Amps)
OCA- 5/100
3-
1
3-1