ElmoMC Gold Line Digital Servo Drives-Gold Bassoon - Manual (Page 59)

Gold Bassoon Installation Guide
MAN-G-BASIG-EC (Ver. 1.002)
|EtherCAT Communications Version| www.elmomc.com
59
Table of Contents
6.13.3 EtherCAT Wiring
Figure 35 describes the wiring diagram for the EtherCAT connections.
Figure 36: EtherCAT RJ-45 Connections
6.13.4 EtherCAT Link Indicators
The Gold Bassoon can serve as an EtherCAT slave device. For this purpose it has two RJ-45
connectors, which are designated as EtherCAT In and EtherCAT Out. Each of these RJ-45 connectors
has two status LEDs, which are shown in Figure 36.
Figure 37: Ethernet Connector LEDs
The green LED is the link/activity indicator. It shows the state of the applicable physical link and the
activity on that link. The amber LED is the speed indicator. It shows the speed of the connection on
the Ethernet line. Refer to the section 12.2.1.2 in the document; MAN-G-Panel Mounted Drives
Hardware manual.