ElmoMC Gold Line Digital Servo Drives-Gold Bassoon - Manual (Page 16)

Gold Bassoon Installation Guide
MAN-G-BASIG-EC (Ver. 1.002)
|Mounting the Gold Bassoon| www.elmomc.com
16
Table of Contents
5.4 Mounting the Gold Bassoon
For optimum heat dissipation, the Gold Bassoon should be installed with the heat sink attached to
the machine's chassis. It is recommended to mount the Gold Bassoon in the vertical position.
M4 round head screws, one through each opening in the heat sink, are used to mount the Gold
Bassoon (see the diagram below).
Figure 1: Mounting the Gold Bassoon with Heat-Sink Fins
Figure 2: Mounting the Gold Bassoon with Standard L-shaped Heat-Sink