ElmoMC Gold Line Digital Servo Drives-Gold Tuba - Manual (Page 11)

Gold Tuba Installation Guide
MAN-G-TUBIG-EC (Ver. 1.201)
|Hardware Requirements| www.elmomc.com
11
Table of Contents
Chapter 5: Installation
The Gold Tuba must be installed in a suitable environment and properly connected to its voltage
supplies and the motor.
5.1. Hardware Requirements
AC Input Requirements
Circuit Breakers & Contacts Three-Phase Supply Voltage
Circuit breaker current rating 40 A Type C
Circuit breaker voltage rating 250 VAC / 480 VAC depending upon operating
AC voltage
Contactor 40 A
Recommended Wire Cross-Sections (All Models)
Feature Connection Details
Recommended Maximum Wire Gauge
30 A Model 40 A Model
AC input AC1, AC2, AC3
14 AWG 12 AWG
Protective Earth PE
14 AWG 12 AWG
Note: The actual size is determined by the drive’s current model.