DIGIWEIGH DWP-10000F Series - Manual (Page 9)

8
Setup Menu Chart
The User (“A”) menu sub-menus appear when scrolling left or right from the “H” menu.
Some selections shown are not available on some versions.
Exiting the setup menu
1. Power off the indicator.
2. On the rear panel, move the Setup/Calibration Switch back to its original position.
3. Power on the indicator. The display will go through a digit check then go into Normal
Operating mode. All front panel keys will now return to their normal mode of
operation.
USER (“A”) MENU
1. Enter the Setup (“H”) menu.
2. Use the right or left directional keys to move right or left in the Setup (“H”) menu until
the indicator shows ” A 1”.