Det-Tronics PM-5MPX Dual Spectrum IR - Manual (Page 9)

7 95-8562 4.1
WARNING
A full system test results in an alarm output. This
will result in the suppression system being activated
if it is not disabled prior to testing.
DEVICE REPAIR AND RETURN
The PM-5MPX is completely potted, which does not
allow it to be repaired. If a problem should develop,
carefully check system wiring and ensure that power is
applied to the device. If it is determined that the problem
is caused by a detector failure, the PM-5MPX must be
replaced.
ORDERING INFORMATION
When ordering, please specify:
PM-5MPX Dual Spectrum
® Infrared Flame Detector
For assistance in ordering a system to meet the needs of
a specific application, contact:
Detector Electronics Corporation
6901 West 110th Street
Minneapolis, Minnesota 55438 USA
Operator: (952) 941-5665 or (800) 765-FIRE
Customer Service: (952) 946-6491
Fax: (952) 829-8750
Web site: www.det-tronics.com
E-mail: [email protected]