Boss Audio Systems ME-50 - Manual (Page 8)

8
Using the Effects
When the power is turned on, the ME-50 always switches to Manual mode, and the OVERDRIVE/DISTORTION,
MODULATION, and DELAY are switched off.
* When the DELAY TYPE is set to HOLD, the DELAY indicator goes on, the DELAY pedal’s indicator flashes at a fixed interval,
indicating recording standby is enabled. (p. 17)
About the Effect Connection Sequence
The ME-50 automatically selects the optimum sequence for connecting the effects according to the effect (p. 19) you select with the
expression pedal.
● When WAH, RING MOD, +1OCTAVE, or -1OCTAVE is Selected
fig.0060
● When RESONANCE and VOICE is Selected
fig.0070
Also, when the MODULATION type is TREMOLO or UNI-V, MODULATION is connected before OVERDRIVE/DISTORTION.
(Example) EXPRESSION: WAH; MODULATION: TREMOLO
fig.0080
All product names mentioned in this document are trademarks or registered trademarks of their respective owners.
Those companies are not affiliated with BOSS and have not licenced or authorized BOSS’s ME-50. Their marks are used
solely to identify the equipment whose sound is simulated by BOSS’s ME-50.
COMPRESSOR
NS REVERB
VOLUME
(PEDAL)
MODULATION
TONE MODIFY
DELAY
EXPRESSION
OVERDRIVE /
DISTORTION
COMPRESSOR
NS REVERB
VOLUME
(PEDAL)
MODULATION
TONE MODIFY
DELAY
EXPRESSION
OVERDRIVE /
DISTORTION
TREMOLO
(MODULATION)
NS REVERB
VOLUME
(PEDAL)
COMPRESSOR TONE MODIFY
DELAY
WAH
(EXPRESSION)
OVERDRIVE /
DISTORTION