Despatch LCC1-87NV-2 - Manual (Page 39)

30
Heater Unit
(Tools needed: Crescent wrench, screwdriver, one quarter (¼) inch socket set)
1.
Disconnect power.
2.
Remove filter cover and filter from left side.
3.
Remove floor plate.
a. Remove screws from the floor plate.
b. Lift floor plate out of the oven.
4.
Disconnect heater leads from heater element with wrench. Note which wires go
on which terminals.
5.
Unscrew screws holding the frame to the oven body.
6.
Remove heater and discard.
7.
Screw down new heater frame.
8.
Attach heater leads to appropriate terminals.
9.
Replace interior floor and screws.
10.
Replace filter and filter cover.
11.
Reconnect power.