dB TECHNOLOGIES DVA NETWORK 1.2 Reference Manual - Manual (Page 8)

7/16
Rev 1.0
3 GROUPS AND EQ
3.1 Create a Group
Each Device can be assigned to a group in order to change Eq. Delay and Gain.
To add a device to a group, Right-
click on the device and click ‘Assign to Group’, then select the proper
group (from A to S, for example ‘A’).
After assigning a device to a group, its external edge gets the group default color.
3.2 Edit Eq, Gain and Delay of a Group
In order to edit Group parameters right- click on the device and click ‘Open Group Eq.’.

GAIN: signal level attenuation (value: from 0 to –20 dB).

DELAY: signal delay setting, expressed in the range of 0 ÷ 20 meters.

INV. PHASE: when selected, the signal phase is inverted.