dB TECHNOLOGIES DVA NETWORK 1.2 Reference Manual - Manual (Page 12)

11/16
Rev 1.0
5 ADVANCED FEATURES
5.1 Parameter Protection Modality
DvaNetwork allows to switch between 2 protection level:

Sound Check modality: Unprotected Mode; user can edit all parameters in real time.
Group Equalization, Volume and delay are changed in Live time; mute, solo and presets are sent to
audio devices without confirmation.

Concert modality: Protected Mode, using the “Settings” window user can select one by one which
parameter will be protected in this modality. Equalization, delay and Gain can be locked or the “Live”
mode can be disabled, requiring a manual “Send” on every modification. A Confirmation popup can
be set to request a confirmation for Mute and solo.
5.2 Storing parameters in Device
Some RDNet compatible devices permit to store in their memory the actual Equalizzation/Gain/Delay that
users have configured by dvaNetwork software.
The “Store all Eq.” button trigger a store data procedure to all the connected and Store-enabled devices in
the synoptic.
For detailed information about recalling stored Eq. please refer to the device’s manual.
5.3 Properties View
The properties window shows all the available properties of the selected devices and allows to change the
properties values (e.g. Delay Preset, xover Preset, etc) simultaneously.
If selected devices are not of the same type (e.g. DVA T12 and DVA S30 in the same selection) only mute is
displayed.