6 communication log, 7 control 2 / control 8 firmware upgrade, 8 settings – dB TECHNOLOGIES DVA NETWORK 1.2 Reference Manual User Manual
Page 14: Communication log, Control 2 / control 8 firmware upgrade, Settings
13/16
Rev 1.0
5.6 Communication Log
Communication Log window (Menu-> Advanced-
>Communication Log) show a log of each command sent by
software to any RDNet device.
It is useful in detecting any failure in the Net.
Every Command “Cmd” is identified by an ID number and the
column “State” indicates the outcome of the command.
If an error occurs the “State” field displays “TIMEOUT” or
“ERROR” and the user can investigate which device generated
the error by consulting “Controller”, “Line” and “Slave” fields.
5.7 Control 2 / Control 8 Firmware Upgrade
DvaNetwork allows you to update Control 2/8 internal
firmware.
To access this functi
onality open “Menu->Advanced-
>Control2/Control8 Firmware Upgrade”.
In order to proceed a Control 2/8 unit must be connected
through an USB port.
The default firmware location is
“C:\
5.8 Settings
Snap to grid: devices placed in synoptic snap to the grid
Grid X, Grid Y: allow to customize the vertical and horizontal grid
steps. Default and optimized value is GridX 80 and GridY 80
Link Objects when overlap:
It’s a magnetic link that graphically joins
devices to each other if they are overlapped.
Auto Synchronize Eq Gain and Delay on startup: if enabled makes
the dvaNetwork automatically send a “Synchronize all” command after
an “Online” or a “Scan devices” procedure. It means that all speakers
will be automatically synchronized with software Eq Delay and Gain.
Live Gain Enabled: Real time Gain update in Concert Mode
Live Delay Enabled: Real time Delay update in Concert Mode
Live Eq. Enabled: Real time Eq filter update Concert Mode
Preset Change Confirm: Enable a confirmation request if preset is
modified in Concert Mode
SOLO and MUTE Confirm: Enable a confirmation request if MUTE/
SOLO commands are activated in Concert Mode
Eq./Gain/Delay Edit Confirm: Enable a confirmation request if Eq./Gain/Delay Edit are edited in
Concert Mode
Eq./Gain/Delay Edit Enabled: Enable editing of Eq./Gain/Delay in Concert Mode